ArchitecturalNumbers.com

Black Modern Address Numbers

Black Anodized Address Numbers, Lifetime Warranty.

3D Preset Ready:4" Avant Garde MediumBlack Anodized1/4" Floating SpacersSample Copy: “187”$68.00/charPersonalize Your Copy ↓
✓ 50 Different Styles (2" to 24" in size)
✓ 12 Architectural Finishes & Colors
✓ All Styles Available in All Finishes
✓ Easy DIY Installation • Flush or Floating
✓ Made in the USA
✓ Lifetime Warranty
Why Specify This Configuration

Across hundreds of U.S. jurisdictions—particularly California Wildland-Urban Interface (WUI) zones, hillside municipalities, multi-family communities, and light-commercial corridors—local amendments to International Fire Code (IFC) Section 505.1 increase the baseline 4-inch requirement to a strict 6-inch minimum character height with a minimum 0.5-inch (1/2") stroke width and high contrast against the mounting background.

Character Height 6" Full Cap Height

Clears both baseline 4" IFC 505.1 rules and stricter 6" WUI / commercial amendments.

Stroke Geometry Futura Bold Sans-Serif

Generous open counters in digits 3, 6, 8, and 9 prevent blurring from 75+ feet away.

High-Contrast Finish Matte Black Anodized

Low-sheen electrochemical black finish eliminates headlight glare on light facades.

Why Font Stroke Width Matters During Final Inspection

One of the most common reasons custom homes and tenant improvements fail signage sign-off is choosing a tall, ultra-thin script or condensed serif font whose vertical stems measure less than 1/2 inch wide. We pre-set the 3D builder above to 6-inch Futura Bold because its uniform geometric stroke comfortably exceeds the half-inch minimum while keeping wide apertures between strokes—making addresses unmistakable to first responders at night or in heavy rain.

Selecting Dark vs. Light Contrast for Your Wall Material

Fire codes mandate that address characters contrast sharply with their background. Before adding your sign to cart, match the finish in Step 3 above to your wall tone:

  • White stucco, cream limestone, pale gray siding, or painted brick: Keep the pre-selected Black Anodized or Dark Bronze Anodized finish for maximum daytime and nighttime contrast.
  • Charcoal stucco, dark espresso wood, black steel, or dark red brick: Switch the finish above to Natural Satin Aluminum, Clear Anodized, or Baked Enamel White (#5687) so the characters pop crisply against dark masonry.
  • Deep setbacks over 85 feet or commercial warehouse bays: Step the height selector up to 8", 10", or 12" directly in the 3D configurator.

Multi-Building HOA & Commercial Rollouts

Ordering matching address packages for townhome buildings, apartment breezeways, or retail suites? Type up to 40 characters (including suite letters or hyphens such as 1045-B) directly into the configurator above, add each building sign to your cart, and every set will arrive individually bagged with its own 1:1 drilling template and concealed stud hardware.

  • Legibility: Balanced stroke width for clear street visibility.
  • Alloy Durability: Solid U.S.-cast metal engineered for exterior weather exposure.
PERSONALIZE
Pro-Tip for Mobile Devices: Rotate your phone to landscape mode for the optimal 3D workshop and side-by-side design controls.
Height × Depth
Side View
6" Ribbon, Dark Bronze Anodized • Overall Width: ~65"
(1) Select Style
(2) Set Size
Height × Depth
Spacers:
Mounting Pattern:
Price: $180.00
(3) Select Finish
47 Architectural Polyurethane Powder-Coat Colors (Factory Standard & Custom Exterior Spec)
Dark Bronze Anodized • Deep architectural bronze tone with subtle metallic warmth. Our most popular finish for modern residential and commercial entryways.
Installation Guides & 1080p60 Video Tutorials
Installed Worldwide 20,000+ Orders
Map of 20,000+ Customer Installations Across the United States
Frequently Asked Questions
How are the numbers mounted without visible screw holes? +
All our metal numbers feature blind stud mounts. Threaded metal studs screw into the backside of each character. You drill matching holes into the mounting wall using the provided full-scale paper template. Studs slide into the drilled holes and are anchor in with silicon. See the installations video.
What are spacers and should I order them? +
Spacers are collar rings that slide over the threaded mounting studs, holding the numbers off the wall to create a "floating" effect.

Spacers are completely optional ($1.00 per character) and come in lengths from 1/4" to 1". You can order them with your set and decide during installation whether you prefer a flush or a floating installation.
Will these numbers rust or fade over time? +
No. Our numbers are made out of aluminum or architectural bronze. They contain zero iron and cannot rust. All our finishes are industrial grade and are engineered for exterior commercial architectural use and backed by our Lifetime Warranty.
How durable are the numbers, especially near coastal areas? +
All of our finishes come with a Lifetime Warranty. For maximum corrosion resistance in coastal environments (within a few blocks of the ocean), we strongly recommend our Anodized finishes for optimal long-term durability.
What size numbers do you recommend? +
Our most popular size is 6 inches.
Many municipalities or fire departments mandate a minimum height of 4 inches. Some cities require 6 inches or larger even for residential properties. Commercial installations frequently warrant 10 inches or larger.
What are your lead times and shipping options? +
The products on average ship within 3 weeks of receiving the order. Standard ground shipping typically adds another 1-4 business days.
If you need the numbers sooner, expedited options are available.
Do you carry alphabet letters, punctuation, and symbols? +
Yes! In addition to 0-9 numbers, we carry the entire A-Z alphabet, as well as punctuation marks and architectural symbols (hyphens, slashes, ampersands) across all listed styles and sizes. In some styles we even have lower case letters.
Do you accept custom jobs and non-standard finishes? +
Absolutely. We can manufacture custom styles, custom sizes, and specialized finishes. Non-standard architectural finishes include Stainless Steel, Solid Copper, Polished Brass, and Hot Rolled Steel.
What is your return policy? +
All of our numbers and letters are custom made per order.
As a courtesy to our clients, we offer a 50% store credit on returned items. If in doubt, request a full-size template to confirm the style and sizing.
Do you ship internationally? +
Yes, we ship worldwide. We calculate international freight at checkout or upon request. Please note that additional customs duties, import taxes, and brokerage fees may be assessed by your local customs authority or postal service.
What does the Lifetime Warranty cover and how do I care for my numbers? +
All our metal products come with our Lifetime Warranty. Should any number fade, break, or exhibit material defects, we will refinish or replace it at no charge, provided it remains at its original installation location.

Care & Maintenance: Exterior metal numbers should be periodically washed with mild dish soap and clean water to remove environmental grime and pollutants. If the surface is ever lightly scuffed, the polyurethane finish can be easily restored using high-quality automotive car wax.
Do you provide installation services? +
Yes! We offer professional on-site installation services throughout Los Angeles County. Please call us for an estimate.